Advanced Wireless Communications MINI PRO Guida Utente

Intel(R) PROSet/Wireless WiFi Connection Utility User's GuideSupported WiFi adapters:● Intel(R) WiMAX/WiFi Link 5350● Intel(R) WiMAX/WiFi

EAP-FAST A-ID GroupsAn administrator can select which Authority Identifier (A-ID) RADIUS server to provision Protected Access Credentials (PACs) for p

Persistent Profiles Persistent profiles are applied at boot time or whenever no one is logged on the computer. After a user logs off, a Persistent pro

Pre-logon/Common profiles are applied prior to a user log on. If Single Sign On support is installed, the connection is made prior to the Windows log-

Common connection, you will be prompted for your user credentials.❍ Enter your credentials.❍ Click OK. The profile is applied and the Status p

network is displayed in the Exclude List Management and is indicated by this icon: To exclude a network:1. Click Include Profiles in this package.2.

ITU G.723 Multi-rate CoderITU G.726 ADPCM (Adaptive Differential Pulse Code Modulation)ITU G.727 Variable-Rate ADPCMITU G.728 LD-CELP (Low-Delay Code

● G711_64kbps● G722_64kbps● G722_56kbps● G722_48kbps● G722_1_32kbps● G722_1_24kbps● G722_1_16kbps● G726_16kbps● G7

To add an A-ID to an A-ID group:1. Select a group from the A-ID Groups list.2. Click Add in the A-IDs section.3. Select an A-ID.4. Click OK. The A

If you do not know how to obtain a user certificate from the CA, consult your administrator for the procedure.To install the CA on the local machine:1

command that brings you to the certificate authority. You can also use the IP address of the server machine. For example, "192.0.2.12/certsrv.&qu

2. Profile Name: Enter a profile name.3. WiFi Network Name (SSID): Enter the network identifier.4. Operating Mode: Network (Infrastructure) is sele

Installing Intel(R) PROSet/Wireless WiFi Connection UtilityTypical Installation The following components are installed in a Typical installation. ●

Back to ContentsSet Administrator PasswordA user cannot modify Administrator settings or profiles unless they have the password for this tool. When yo

Back to ContentsAdministrator Tool SettingsThese settings allow the administrator to control where profiles are placed in the Administrator's Pro

Insert on bottom Select to place Administrator profiles at the end of the Administrator's Profiles list. (Persistent, Pre-logon/Common or Voice o

Back to ContentsApplication Settings (Administrator Tool)An administrator can configure the Intel(R) PROSet/Wireless WiFi Connection Utility settings

NOTE: If the user has manually turned off the wireless radio, the radio will not turn on again when an wired Ethernet connection is lost. The user mus

Turn off unauthenticated provisioning after PAC is provisioned: Option to turn off auto-provisioning automatically after a PAC for that A-ID has been

configuration of Device to Device (ad hoc) profiles. ● Show device to device application settings ● Hide device to device application settings

Microsoft Windows XP CoexistenceSelect Enable Microsoft Wireless Zero Configuration and Intel PROSet/Wireless WiFi to coexist on this system.Enable th

Security LevelSelect the security level on a user's computer. Users are able to connect to profiles only with this security level. ● Allow th

Support Information Specify the support information displayed in the About box of the WiFi connection utility.● Support URL: Enter the support cen

the minimal installation. ● The WiFi connection utility. For a Typical installation, this includes the following: ❍ Wi-Fi Protected Setup*❍

Wi-Fi Protected Setup* The WiFi connection utility can be configured to operate as a registrar for a Wi-Fi Protected Setup supported access points. Th

Select to allow the user to turn on/off the 802.11a radio separately from the 802.11b/g radio. If you select this, the Disable 802.11a Radio On/Off se

Back to ContentsAdapter Settings (Administrator) The Adapter Settings screen controls and displays the device properties for the WiFi adapter installe

802.11n Channel Width (2.4 GHz) Set high throughput channel width to maximize performance. Set the channel width to Auto or 20MHz. Auto is the default

must be selected. No security (None) can be selected to enable network setup and troubleshooting. An administrator can enable or disable support for h

Ad Hoc QoS Mode Quality of Service (QoS) control in ad hoc networks. QoS provides prioritization of traffic from the access point over a wireless netw

Mixed Mode ProtectionUse to avoid data collisions in a mixed 802.11b/11g/11a/11n environment. Request to Send/Clear to Send (RTS/CTS) should be used i

Roaming AggressivenessThis setting lets you define how aggressively a wireless client roams to improve connection to an access point. Click Use defaul

Coverage: Set the adapter to the maximum transmit power level. Select for maximum performance and range in environments with limited additional radio

Back to ContentsTrademarks and Disclaimers

Intel(R) Wireless Troubleshooter: Provides valuable assistance in resolving wireless WiFi connection problems. To install these features, select Custo

Back to ContentsAdvanced Statistics (Advanced menu)The Advanced Statistics provides current adapter connection information. This information defines h

have moved the adapter outside the coverage area of the access point or the access point's device address information has been changed.● AP l

received and sent by the WiFi adapter.LoggingSet the duration that you want to record statistical data for your WiFi adapter.Configure logging setting

Back to TopBack to ContentsTrademarks and Disclaimers

Back to ContentsAdvanced SettingsUse the Advanced Settings to password protect a profile, select a specific access point on a network to connect to, s

Band Selection Here you can select the band to use for this connection profile: ● Mixed Band (default) : Select this to the have WiFi connection

Maintain ConnectionThe Maintain Connection option maintains the wireless connection with a user profile after log off.If the Maintain Connection optio

Back to TopBack to ContentsTrademarks and Disclaimers

Back to ContentsProfile ManagementNOTE: This section describes profiles created with Intel(R) PROSet/Wireless WiFi Connection Utility. These profiles

Administrator Tool must be installed to create Administrator profiles. For more information, see Administrator Profiles . Profiles ListThe Profiles li

5. Click I accept the terms in the license agreement. You can click Print if you want a printed copy of the agreement. Then click Next. 6. Click Nex

Profile NameThe Profile Name is your name for this network. It can be anything that helps you identify this network. For example, My Home Network, Cof

1. Right-click the Intel PROSet/Wireless WiFi Taskbar icon. 2. Click Connect to Profile. 3. Select a profile.4. Click to start the connection. Cre

5. Select the Operating Mode: Network (Infrastructure) or Device to Device (ad hoc). 6. Click Advanced for the following options: ❍ Auto Connect

8. Select either Personal or Enterprise Security to select the Network Authentication and Data Encryption options. Enter the encryption key setting

9. Click OK when you have completed the profile settings. To change or verify the profile settings, click Back. 10. If you are not currently conne

Remove a ProfileTo remove a profile: 1. Click Profiles on the Intel PROSet/Wireless WiFi main window.2. Select the profile from the list.3. Click R

NOTE: To export Administrator profiles, see Administrator Packages. Import Profiles into the Profiles ListTo import profiles manually: 1. Click Impor

Password Protected ProfilesImport and export password-protected user-based profiles automatically to remote systems. If a profile is password protecte

Back to ContentsProfile Wizard General SettingsThe General Settings page is the first page in the Create WiFi Profile Wizard. From this page you can s

point, it is displayed in the WiFi Networks list. To associate with an <SSID not broadcast> network entry, a new profile must be created before

3. Click Change.4. The next message displays: Welcome to the InstallShield Wizard to Intel(R) PROSet/Wireless WiFi Software. Click Next. 5. Click

Next Proceeds to the Security Settings page.OKFinishes creation of the new profile with the current settings.CancelCloses the Create WiFi Profile Wiz

Back to ContentsExclude List ManagementThe Exclude list is a list of networks that you will not automatically be connected to. This feature lets you r

DetailsClick Details to learn specific information on how the access point was excluded and how to remove it from exclusion. Following is an example:

Back to TopBack to ContentsTrademarks and Disclaimers

Back to ContentSet Up Profile SecurityUse the Intel(R) PROSet/Wireless WiFi Connection Utility Personal Security Personal Security Settings Set up Da

The following sections describe how to use the WiFi connection utility to set up the required security settings for your WiFi adapter. See Personal Se

Pass phrase (64-bit): Enter five (5) alphanumeric characters, 0-9, a-z or A-Z. Hex key (64-bit): Enter 10 hexadecimal characters, 0-9, A-F.Key Length:

Set up a Client with WEP 64-bit or WEP 128-bit Data EncryptionWhen WEP data encryption is enabled, a network key or password is used for encryption.A

WEP key (64-bit)Enter 10 hexadecimal characters, 0-9, A-F.Pass phrase (128-bit)Enter 13 alphanumeric characters, 0-9, a-z or A-Z.WEP key (128-bit)Ente

WiFi Network Name (SSID) display. Network (Infrastructure) should be selected as the Operating Mode.4. Click Next to open the Security Settings.5. S

Back to ContentsGet ConnectedConnect to a WiFi Network First Time Connection Using Wi-Fi Protected Setup* Configure an Access Point and set up a Netwo

4. Security Settings: Select WPA2-Personal (AES-CCMP) to provide this level of security in the small network or home environment. It uses a password,

Back to ContentsConfigure Profiles for Network (Infrastructure) Operating ModeA Network (Infrastructure) network consists of one or more access points

correct network name (SSID) can associate with an access point and gain access to the network.10. Data Encryption: None is the default.11. Click OK.

Network AuthenticationWi-Fi Protected Access (WPA) is a security enhancement that strongly increases the level of data protection and access control t

protection for multiple users and large managed networks. It prevents unauthorized network access by verifying network users through an authentication

7. Click Next to open the Security Settings.8. Click Enterprise Security.9. Network Authentication: Select Open (Recommended).10. Data Encryption:

11. Click Enable 802.1X if it is not already selected. 12. Authentication Type: Select EAP-AKA.EAP-AKA User (optional) 1. Click Specify user name (

Step 1 of 2: TLS User1. Obtain and install a client certificate. See Create a Profile with TLS authentication or consult your system administrator.2

Step 2 of 2: TLS Server1. Select one of the following credential retrieval methods: Validate Server Certificate or Specify Server or Certificate Name

over a non-exposed TLS encrypted channel.To set up a client with TTLS Authentication:1. Click Profiles on the WiFi connection utility main window. Or

3. Click Connect. If the network does not require security authentication, a desktop alert notifies you that you are connected to the network. See

Step 1 of 2: TTLS User1. Authentication Protocol: This parameter specifies the authentication protocol operating over the TTLS tunnel. The protocols

Step 2 of 2: TTLS Server1. Select one of the following credential retrieval methods: Validate Server Certificate or Specify Server or Certificate Nam

When 802.1X Microsoft IAS RADIUS is used as an authentication server, the server authenticates the device using the Roaming Identity from Intel PROSet

To configure a one-time password:1. Authentication Protocol: Select GTC (Generic Token Card).2. User Credentials: Select Prompt each time I connect.

4. Click OK.5. If you are acting as the user, perform the following three steps. 6. Select the profile on the WiFi Networks list. 7. Click Connect

1. Select one of the following credential retrieval methods: Validate Server Certificate or Specify Server or Certificate Name.2. Click OK. The pro

are notified that you must take one of the following actions:A potential authentication problem for profile has been detected. The expiration date in

15. Click Enable Radio Management Support to detect rogue access points.16. Click OK to return to the Security Settings.LEAP User:

1. Select one of the following authentication methods listed next. If under Administrator Profile Type you selected Persistent (with or without sele

credentials (PACs) to establish an authenticated tunnel between a client and a server.Cisco Compatible Extensions, Version 4 (CCXv4) improves the prov

needed to log into this network. 8. After entering the required information, click OK to connect to the wireless network. See Main Window for more in

a. Click Select server to open the Protected Access Credentials (PAC) list.b. Click Import to import a PAC that resides on this computer or a serve

7. Click Next to open the Security Settings.8. Click Enterprise Security.9. Network Authentication: Select WPA-Enterprise or WPA2-Enterprise (Recom

FAST peer must use Server-Authenticated Mode whenever a certificate or public key is available to authenticate the server and ensure the best security

click Next (no roaming identity is required) and proceed to Step 3 to configure EAP-FAST Server certificate settings. If you do not need to configure

Step 3 of 3: EAP-FAST Server Authenticated-TLS-Server Provisioning Mode is supported using a trusted CA certificate, a self-signed server certificate,

1. Leave unchecked Disable EAP-FAST Enhancements (CCXv4).2. Allow authenticated provisioning and Allow unauthenticated provisioning are both checked

Back to ContentsGeneral TroubleshootingIntel(R) Wireless Troubleshooter Wireless Event Viewer Manual Diagnostics Tool Resolving ErrorsBasic Troublesho

Your wireless connection is slower than expected.1. Move closer to the access point.2. Power cycle access point.3. Update access point firmware fro

● Select Service● Click Add.● Select File and Printer Sharing for Microsoft Networks.● Click OK11. Close OK to close Wireless Network

Data transfer is sometimes very slow.Microwave ovens, some baby monitors, cordless game controllers, and some cordless phones operate at the same radi

6. The next message tells you that one or more compatible devices are within range of your computer. Click this message. (Or, you can select the ne

How do I configure roaming identity for multiple users?Configure Roaming Identity to support multiple users: If you use a Pre-logon/Common profile tha

Back to ContentsIntel(R) Wireless Troubleshooter (Tools menu)Intel(R) Wireless Troubleshooter Window Open Intel(R) Wireless Troubleshooter Resolve E

ViewHistory: Displays or removes the History data on the right panel of the Intel(R) Wireless Troubleshooter. ToolsManual Diagnostics Tool: Run diagno

Adapter Driver is not loaded Disconnection from an access point If you are an advanced user or administrator, use these error messages to diagnose pro

The ad hoc network is idle and no peers have joined the network If you create an ad hoc network and no peers join that ad hoc network for two minutes,

This alert notification is enabled or disabled in the Application Settings.To clear this message:1. From the Tools menu, click Application Settings.2

No wireless network adapter was detected in the systemThe system could not detect an Intel WiFi adapter in the system. The adapter may be removed or n

Intel wireless adapter from the Intel Corporation Support Web site at www.intel.com/support/. If an Intel(R) PRO/Wireless adapter is not listed, conta

If you receive the message Cannot Continue the Hardware Update Wizard, contact the Intel Corporation Support Web site at www.intel.com/support/.Discon

No certificate found This error may occur if a machine certificate or a user certificate was not found in the relevant certificate store. To resolve,

● WiFi Network Overview● Administrator Tool● Create Administrator Packages ● Create Profiles for Windows XP*● Security Overview●

8. At the next window, enter the Device Ownership Password that you retrieved from the access point in step 1. Click Next to continue. 9. The ne

Authentication failed due to invalid user credentials: Reenter credentialsThis authentication error can be caused by invalid user credentials when usi

7. Click OK to save the settings.NOTE: Certificates: The specified identity should match who the certificate is issued to and should be registered on

name This authentication error can be caused by invalid server identity information. Use the following steps to resolve this error:1. Select the appr

Authentication failed due to an invalid server certificate: Select another certificate This authentication error can be caused by an invalid server ce

This error occurs when the AAA Server does not accept the configured authentication. Use the following steps to resolve this error: 1. Double-click t

This error occurred because the Smart Card was unexpectedly removed. Use the following steps to resolve this error: 1. Insert the Smart Card. 2. Sel

Back to TopBack to ContentsTrademarks and Disclaimers

Back to ContentsManual Diagnostics ToolThe Manual Diagnostics Tool lets you run a set of diagnostics tests that verify the functionality of your WiFi

● For computers running Windows Vista*, click Start > All Programs > Intel PROSet Wireless > WiFi Manual Diagnostics. To set the log file

Driver TestThe test summary displays the Intel(R) PRO/Wireless Network Connection driver supported by the WiFi adapter. The test verifies if the drive

The access point is already configured. Do you want to reconfigure it? If you do not want to reconfigure the access point, select No. The software j

Association TestThe test summary displays Associated or Not Associated. Association is the establishment and maintenance of the wireless link between

Signal Test The test summary displays the signal quality. If the signal quality is low, use the Troubleshoot button to diagnose and fix the problem. T

Trademarks and Disclaimers

Back to ContentsWireless Event ViewerThe Wireless Event Viewer program displays a list of error log records. You can save all available log records to

Name DescriptionFileSettings: To change the storage location of the log file. 1. Click File > Settings to open the Wireless Event Viewer Settings.

Wireless Event Viewer Information Level: The severity level of the connection issue is indicated by an icon. The severity levels are: ● Informatio

Back to ContentsSpecifications● Intel(R) WiMAX/WiFi Link 5350● Intel(R) WiMAX/WiFi Link 5150● Intel(R) WiFi Link 5300 ● Intel(R) WiFi

Operating Temperature0 to +80 degrees CelsiusHumidity 50% to 90% non-condensing (at temperatures of 25 ºC to 35 ºC)WiFiFrequency Modulation5 GHz (802.

WLAN Standard IEEE 802.11g, 802.11b, 802.11a, 802.11nArchitecture Infrastructure or ad hoc (peer-to-peer) operating modesSecurity WPA-Personal, WPA2-P

Dimensions Full-Mini Card: Width 2.00 in x Length 1.18 in x Height 0.18 in (50.95 mm x 30 mm x 4.5 mm)Half-Mini Card: Width 1.049 in x Length 1.18 in

The following window appears briefly and shows the configuration of wireless settings for the access point. 14. After the network receives the Ow

Operating Systems Microsoft Windows XP* (32 and 64 bit) and Windows Vista* (32 and 64 bit).Wi-Fi Alliance* certification Wi-Fi* certification for 802.

Humidity 50% to 95% non-condensing (at temperatures of 25 ºC to 35 ºC)Frequency Modulation 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n)Frequency band 5.15

Wi-Fi Alliance* certification Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-

Humidity 50% to 95% non-condensing (at temperatures of 25 ºC to 35 ºC)Frequency Modulation 5 GHz (802.11a) 2.4 GHz (802.11b/g)Frequency band 5.15 GHz

Dual Diversity Antenna On-board dual diversity switchingConnector Interface 52-pin Mini Card edge connectorVoltage 3.3 VOperating Temperature 0 to +80

Form Factor PCI Express Mini CardDimensions Width 2.00 in x Length 1.18 in x Height 0.18 in (50.95 mm x 30 mm x 4.5 mm)Antenna Interface Connector Hir

Intel(R) PRO/Wireless 2915ABG Network ConnectionForm Factor Mini PCI Type 3ADimensions Width 2.85 in x Length 1.75 in x Height 0.20 in (72.39 mm x 44.

Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps11, 5.5, 2, 1 MbpsGeneralOperating Systems Microsoft Windows XP and Windows VistaWi-Fi Alliance* certifica

Operating Temperature 0 to +70 degrees CelsiusHumidity 50 to 85% non-condensingFrequency ModulationOFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, C

Back to ContentsRegulatory InformationIntel(R) WiMAX/WiFi Link 5350 and Intel(R) WiMAX/WiFi Link 5150 Adapters ● Information for the User● Reg

the access point and the registrar. 15. If you want to save these settings to a profile for future use by a legacy client, click Save wireless sett

NOTE: Due to the evolving state of regulations and standards in the wireless LAN field (IEEE 802.11 and similar standards), the information provided h

Other Wireless DevicesSafety Notices for Other Devices in the Wireless Network: See the documentation supplied with wireless adapters or other devices

Information To Be Supplied to the End User by the OEM or IntegratorThe following regulatory and safety notices must be published in documentation supp

● Reorient or relocate the receiving antenna. ● Increase the distance between the equipment and the receiver. ● Connect the equipment to a

❍ The use of wireless devices in hospitals is restricted to the limits set forth by each hospital.Antenna Use● In order to comply with FCC RF

● IEEE Std. 802.11n draft 2.0 compliant on Wireless LAN ● Wireless Fidelity certification, as defined by the Wi-Fi Alliance The Intel(R) WiFi

This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for

The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85 GH

Malti [Maltese]Hawnhekk, Intel(R) Corporation, jiddikjara li dan Intel(R) WiFi Link 5300 jikkonforma mal-•ti•ijiet essenzjali u ma provvedimenti o•raj

Nederlands [Dutch]Hierbij verklaart Intel(R) Corporation dat het toestel Intel(R) WiFi Link 5100 in overeenstemming is met de essentiële eisen en de a

2. The WiFi Network Configuration start up page opens. Use the Available Networks list to select the network that you want to connect to (in this e

Radio ApprovalsTo determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type

substantially below the FCC’s recommended limits.The following safety precautions should be observed:● Do not touch or move antenna while the unit

punished as such.For country-specific information, see the additional compliance information supplied with the product.Wireless InteroperabilityThe In

modification, substitution or attachment is the responsibility of the user. Intel Corporation and its authorized resellers or distributors are not lia

Underwriters Laboratories Inc. (UL) Regulatory WarningFor use in (or with) UL Listed personal computers or compatible.Brazil Este equipamento opera em

Esti [Estonian]Käesolevaga kinnitab Intel(R) Corporation seadme Intel(R) Wireless WiFi Link 4965AGN or Intel(R) Wireless WiFi Link 4965AG_ vastavust d

The use of these equipments is regulated by:1. D.L.gs 1.8.2003, n. 259, article 104 (activity subject to general authorization) for outdoor use and a

Tri-mode wireless LAN adapters (802.11a/802.11b/802.11g ) Intel(R) PRO/Wireless 3945ABG Network Connection (model WM3945ABG)Dual-mode wireless LAN ada

illegal. Use On Aircraft Caution Caution: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their

Regulatory InformationInformation for the OEMs and IntegratorsThe following statement must be included with all versions of this document supplied to

4. The next window appears, displaying the Device Password (enrollee password). The password displayed at the enrollee is a unique, randomly genera

used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio f

d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.»European Union The low band 5.15 -5.35 GHz is for ind

This equipment complies with the essential requirements of the European Union directive 1999/5/EC.•esky [Czech]Intel(R) Corporation tímto prohlašuje,

Nederlands [Dutch]Hierbij verklaart Intel(R) Corporation dat het toestel Intel(R) PRO/Wireless 3945ABG Network Connection or Intel(R) PRO/Wireless 394

Radio ApprovalsTo determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type n

● In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum distance of 20 cm (8 inches) or more

The Intel(R) PRO/Wireless 2915ABG Network Connection adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of ene

product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite sy

Declaration of Conformity

NOTE: This process assumes that the registrar is running the WiFi connection utility; the process and windows displayed at the registrar may be differ

This equipment complies with the essential requirements of the European Union directive 1999/5/EC.Czech Intel(R) Corporation tímto prohlašuje, že tent

French Par la présente Intel(R) Corporation déclare que l'appareil Intel(R) PRO/Wireless 2915ABG Network Connection est conforme aux exigences es

Spanish Por medio de la presente Intel(R) Corporation declara que el Intel(R) PRO/Wireless 2915ABG Network Connection cumple con los requisitos esenci

Belarus2.4 GHz OFDM (802.11g) is not allowed at this time.Indonesia5 GHz interface is not allowed at this time.Kuwait5 GHz interface is not allowed at

Intel(R) PRO/Wireless 2200BG Network ConnectionInformation for the UserSafety NoticesThe FCC with its action in ET Docket 96-8 has adopted a safety st

Wireless InteroperabilityThe Intel(R) PRO/Wireless 2200BG Network Connection adapter is designed to be interoperable with any wireless LAN product tha

no guarantee, however, that such interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

This equipment complies with the essential requirements of the European Union directive 1999/5/EC.English Hereby, Intel(R) Corporation, declares that

7. The last window shows that the enrollee registration with the registrar is complete. Click Finish. 8. At the enrollee, click Next. At the enr

Hungarian Alulírott, Intel(R) Corporation nyilatkozom, hogy a Intel(R) PRO/Wireless 2200BG Network Connectionmegfelel a vonatkozó alapvetõ követelmény

2.4 GHz OFDM (802.11g) is not allowed at this time.KoreaTaiwanPakistanPakistan Telecommunication Authority (PTA) Approved.Radio ApprovalsTo determine

Back to ContentsCustomer SupportIntel support is available online or by telephone. Available services include the most up-to-date product information,

Back to ContentsWarrantyProduct Warranty InformationOne-Year Limited Hardware WarrantyLimited WarrantyIn this warranty statement, the term "Produ

● REPAIR the Product by means of hardware and/or software; OR● REPLACE the Product with another product, OR, if Intel is unable to repair or r

invalid RMA number, on the package. You must deliver the returned Product to the designated ICS center in the original or equivalent packaging, with s

BE LONDON AND THE APPLICABLE LAW SHALL BE THAT OF ENGLAND AND WALES IN THE EVENT OF ANY CONFLICT BETWEEN THE ENGLISH LANGUAGE VERSION AND ANY OTHER TR

Back to ContentsGlossary of TermsTerm Definition802.11 The 802.11 standard refers to a family of specifications developed by the IEEE for wireless LAN

AES-CCMP Advanced Encryption Standard - Counter CBC-MAC Protocol is the new method for privacy protection of wireless transmissions specified in the I

DSSS Direct Sequence Spread Spectrum. Technology used in radio transmission. Incompatible with FHSS.EAP Short for Extensible Authentication Protocol,

Add an Enrollee to an Existing Network at the RegistrarThis following procedure lets you add an enrollee to an existing network, where the access poin

EAP-SIMExtensible Authentication Protocol-Subscriber Identity Module (EAP-SIM) authentication can be used with: ● Network Authentication types: Op

LEAP (Light Extensible Authentication Protocol)A version of Extensible Authentication Protocol (EAP). LEAP is a proprietary extensible authentication

Preferred networkOne of the networks that has been configured. Such networks are listed under Preferred networks on the Wireless Networks tab of the W

stealth A stealth access point is one that has the capability and is configured to not broadcast its SSID. This is the WiFi network name that appears

WEP Key Either a pass phrase or hexadecimal key. The pass phrase must be 5 ASCII characters for 64-bit WEP or 13 ASCII characters for 128-bit WEP. For

WPA-EnterpriseWi-Fi Protected Access-Enterprise applies to corporate users. A new standards-based, interoperable security technology for wireless LAN

Back to TopBack to ContentsTrademarks and Disclaimers

that affect radio operation and to ensure electromagnetic compliance (EMC). These parameters include, without limitation, RF power, spectrum usage, ch

Back to ContentsWiFi Networks listThe WiFi Networks list displays a list of WiFi networks within range of the adapter. To update the list, click Refre

The band frequency being used by the wireless network (802.11a, 802.11b, 802.11g, or 802.11n).The wireless network is on the Exclude list or the profi

Back to ContentsConnection Status IconsThe connection status icons indicate the current connection status of your WiFi adapter. The connection status

Properties Provides adapter connection status information. See Network Properties for information.WiFi On/ WiFi Off Switch the radio off and on. See T

Back to ContentsNetwork PropertiesNetwork Properties Manage Exclusions Click Properties at the Intel(R) PROSet/Wireless WiFi Connection Utility main w

Operation ModeDisplays the current mode: ● Network (Infrastructure)A wireless network centered around an access point. In this environment, the ac

Access Points in this Network <0-50>● Signal Strength: The signal strength icon bars indicate the strength of the transmit and receive signa

Back to ContentsNetwork Connection DetailsWhen you are connected to a network, click the Details button on the Intel(R) PROSet/Wireless WiFi Connectio

Signal QualityA radio frequency (RF) signal can be assessed by two components: ● signal strength (quantity)● signal qualityThe quality of the

Adapter MAC AddressMedia Access Control (MAC) address for the WiFi adapter.BandIndicates the wireless band of the current connection.● 802.11a●

Back to ContentsUse the Intel(R) PROSet/Wireless WiFi Connection Utility Use Intel(R) PROSet/Wireless WiFi Connection Utility as your Wireless Manager

802.1X Authentication TypeDisplays None, EAP-SIM, TLS, TTLS, PEAP, LEAP, or EAP-FAST. See Security Overview for more information.802.1X Authentication

AP Signal StrengthThe strength of the signal received from the access point, at the adapter. This value is given in milliwatts (mW) and may actually b

Back to ContentsTurn WiFi Radio On or OffTo switch the wireless radio on or off, use one of the following methods:● The optional hardware radio sw

NOTE: If you turned off the radio from Microsoft Windows, then you must use Microsoft Windows to turn the radio on. You cannot use a hardware switch o

Back to ContentsTaskbar Icon● Taskbar Menu Options● Taskbar Icons● Tool Tips and Desktop Alerts● Start Intel PROSet/Wireless from Task

Name DescriptionOpen Wireless Zero Configuration Click to open Windows Zero Configuration, the wireless connections manager provided by Windows*. Only

Connected to a wireless network: Connected to a wireless network. Tool tip displays network name, speed, signal quality and IP address. The icon is gr

Start Intel PROSet/Wireless WiFi from TaskbarTo start Intel(R) PROSet/Wireless WiFi software: ● Double-click the Taskbar icon located in the lo

Back to ContentsApplication Settings (Tools menu)The Application Settings control the behavior of the Intel(R) PROSet/Wireless WiFi Connection Utility

Name DescriptionAdapterLists the network adapter. It may be any one of the following:● Intel(R) WiMAX/WiFi Link 5350● Intel(R) WiMAX/WiFi Link

Use Intel(R) PROSet/Wireless WiFi Connection Utility as Your Wireless ManagerIntel(R) PROSet/Wireless WiFi Software is used to set up, edit, and manag

NotificationsShow Alert Notifications: Select to display desktop alerts next to the taskbar icon. When your action is required, a message displays. On

Auto ConnectConnect to available network using profiles only: (Default) Connect the WiFi adapter to an available network with a matching profile from

Shared Folder NotificationFile and printer sharing enables other computers on a network to access resources on your computer. You should be cautious w

Network Name (SSID) NotificationNotifies you when the default network name (SSID) is used to connect to a network. Common examples of pre-defined, def

Help?Provides help information for this page.Back to TopBack to ContentsTrademarks and Disclaimers

Back to ContentsAdapter Settings (Advanced tab)The Adapter Settings, advanced tab, displays the device properties for the WiFi adapter installed on yo

● Intel(R) WiMAX/WiFi Link 5150● Intel(R) WiFi Link 5300● Intel(R) WiFi Link 5100● Intel(R) Wireless WiFi Link 4965AGN● Intel(R) W

802.11n Mode The 802.11n standard builds on previous 802.11 standards by adding multiple-input multiple-output (MIMO). MIMO increases data throughput

Ad Hoc Power ManagementSet power saving features for device to device (ad hoc) networks. ● Disable: Select when connecting to ad hoc networks that

Fat Channel Intolerant This setting communicates to surrounding networks that this WiFi adapter is not tolerant of 40MHz channels in the 2.4GHz band.

Intel(R) PROSet/Wireless WiFi Connection Utility Main WindowThe WiFi Connection Utility Main Window lets you:● View the current connection details

Power ManagementLets you select a balance between power consumption and WiFi adapter performance. The WiFi adapter power settings slider sets a balanc

Throughput EnhancementChanges the value of the Packet Burst Control. ● Enable: Select to enable throughput enhancement.● Disable: (Default) Se

Wireless ModeSelect which mode to use for connection to a wireless network: ● 802.11a only: Connect the wireless WiFi adapter to 802.11a networks

Back to TopBack to ContentsTrademarks and Disclaimers

Back to ContentsWireless Network OverviewAbout Wireless Networks What do I need to Set up a Wireless Network? Wireless Networking Basics ● What is

wireless network.● If you want internet access for your WLAN, you also need broadband internet service such as cable or DSL. This includes a broad

WiFi connection utility can easily help you set up a security method for your WLAN. Common security methods for WLANs use keys or passwords, where the

wireless computers to send information directly to other wireless computers. You can use Device-to-Device mode to network computers in a home or small

Back to ContentsSecurity OverviewThis section describes the various security methods used to help protect WiFi networks.Protecting Your WiFi Network●

● TKIP● CKIPAuthentication Types● TLS● TTLS● PEAP● LEAP● EAP-SIM● EAP-FAST● EAP-AKAAuthentication Protocols● P

Connection Details On the main window, click Details to view detailed parameters of the access point and network adapter. The Connection Details windo

Authentication is the process of identifying and approving a request from a client (usually a laptop) to access a network at a network access point. O

Wired Equivalent Privacy (WEP) uses encryption to help prevent unauthorized reception of wireless data. WEP uses an encryption key to encrypt data bef

This section describes security common used by larger companies. Overview What is Radius? How 802.1X Authentication Works 802.1X Features OverviewThe

and authenticating access to port-based 802.11 wireless and wired Ethernet networks. Port-based network access control is similar to a switched local

❍ PEAP❍ EAP-SIM ❍ EAP-FAST❍ EAP-AKANetwork Authentication OpenSee Open Authentication.SharedSee Shared Authentication. WPA-PersonalSee

Data EncryptionAES-CCMPAdvanced Encryption Standard - Counter CBC-MAC Protocol. The new method for privacy protection of wireless transmissions specif

use passwords. EAP-TLS authentication supports dynamic WEP key management. The TLS protocol is intended to secure and authenticate communications acro

with the network.Authentication ProtocolsPAPPassword Authentication Protocol is a two-way handshake protocol designed for use with PPP. Password Authe

to provide mutual authentication and to negotiate an encryption algorithm and cryptographic keys before data is transmitted. Only available for PEAP a

NOTE: CKIP is not used with WPA/WPA2 Personal/Enterprise network authentication. NOTE: CKIP is only supported through the use of the WiFi connection u

Name DescriptionFileExit: Closes the WiFi connection utility main window.ToolsApplication Settings: Use to set system wide connection preferences. See

used in LEAP.The EAP-FAST method is divided into two parts: provisioning and authentication. The provisioning phase involves the initial delivery of t

Back to ContentsPersonal SecurityUse Personal Security if you are a home or small business user who can use a variety of simple security procedures to

General Settings Select to open the Personal Security Settings. The security settings that are available are dependent on the Operating Mode selected

Advanced buttonClick to access the Advanced Settings and configure the following options:● Auto Connect: Select to automatically or manually conne

WEP encryption provides two levels of security:● 64-bit key (sometimes referred to as 40-bit)● 128-bit key (also known as 104-bit)For improved

security settings for the WiFi adapter.To create a profile for a WiFi network connection with no encryption perform these steps:1. Click Profiles on

WEP key, even though authentication is successful, the device is unable to transmit data through the access point or decrypt data received from the ac

To configure a profile with WPA-Personal network authentication and TKIP data encryption:1. On the WiFi connection utility main window, double-click

1. On the WiFi connection utility main window, double-click an infrastructure network from the WiFi Networks list or select the network and click Con

Back to ContentsEnterprise SecurityFrom the Security Settings page you can enter the required security settings for the selected wireless network. See

ProfilesManage Profiles: Select to create or edit profiles.Manage Exclusions: Select to exclude networks from automatic connection. See Manage Exclusi

Network AuthenticationIf you configure a profile for Device to Device (ad hoc) networking, the default setting is Open authentication.If you configure

Enable 802.1X (Authentication Type)Click to open the following 802.1X authentication types:● TLS● TTLS● PEAP● LEAP● EAP-FAST●

● Password Protection: Select to password protect a profile. ● Start Application: Specify a program to be started when a wireless connection i

zeelans.com, where the server is blueberry.zeelans.com).❍ Password: Specifies the user password. The password characters appear as asterisks. This

● Server name must match the specified entry exactly: When selected, the server name must match exactly the server name found on the certificate.

Cancel Closes the Profile Wizard and cancels any changes made.Help?Provides the help information for the current page.Back to TopBack to ContentsTrade

Back to ContentsAdministrator ToolSet Administrator Password Administrator Tool Settings Administrator Packages for Windows XP* Administrator Profiles

you need to create the package on a computer running Windows Vista. You cannot create a package for Windows Vista on a computer running Microsoft Wind

Open an existing packageSelect to browse for and open an existing package.4. Click OK.5. Configure the following options to be included in the packa

Administrator Package.Administrator ProfilesAdministrator Profiles are managed by the network administrator. These profiles can be exported to other c